Below Ground Bruiser Tanks

The Bruiser is one tough tank! It can be used as a septic tank, a holding tank, a pump chamber or as a cistern tank for potable water.

  • Use native soils for backfill
  • No water needed during backfilling
  • Pre-plumbed according to state code
  • Accepts 4″ effluent filters

Pre-plumbed: Norwesco Bruiser tanks are shipped to you ready for installation. Our pre-plumbed tanks include tee assemblies installed at the inlet and outlet. Tees are sized/cut according to each state code so the tank that you receive will be ready for installation.

Watertight Lid: Norwesco Bruiser tanks come outfitted with a domed lid. This improved design is significantly stronger than other lid designs. When leaving our factory, the lid is attached to the tank with stainless steel screws and comes standard with a foamed, polyethylene gasket between the lid and the tank. The gasket provides a watertight seal at the lid area.

Below Ground Bruiser Tanks

Gallon Capacity Length Width Height Height
to Inlet
Height
to Outlet
Manhole
Diameter
Part
No.
1000 (1 Compartment) Plumbed 102" 60" 58" 51" 48" 2-20" *
1250 (1 Compartment) Plumbed 116" 55" 66" 57" 54" 2-20" *
1500 (1 Compartment) Plumbed 133" 55" 66" 57" 54" 2-20" *
1000 (2/3-1/3) Plumbed 102" 60" 58" 51" 48" 2-20" *
1250 (2/3-1/3) Plumbed 116" 55" 66" 57" 54" 2-20" *
1500 (2/3-1/3) Plumbed 133" 55" 66" 57" 54" 2-20" *
*See chart below for part numbers. We are in the process of obtaining the state approvals for the Bruisers and will update our website as these approvals become available. If you need immediate information, please contact us.

A=ALL; B=St. Bonifacius, MN; C=Lancaster, OH; D=Griffin, GA; E=Shawnee, OK; F=Tooele, UT; G=Owego, NY; H=Washougal, WA; L=Hanford, CA

Tank dimensions and capacities may vary slightly and are subject to change without notice.

This chart is to aid you in selecting the appropriate tank based on the state in which the BRUISER is being installed. The part numbers vary due to the length and material of the pipe and tees installed in the tank. We are in the process of obtaining the state approvals for the Bruisers and will update our website as these approvals become available.

DESCRIPTION STATE OF INSTALLATION
OR WA CAN
1000 1-Compartment 41734 - -
1250 1-Compartment 41752 - -
1500 1-Compartment 41771 - -
1000 2-Compartment 41735 41739 41736
1250 2-Compartment 41753 41756 41754
1500 2-Compartment 41772 41777 41774

Tank dimensions and capacities may vary slightly and are subject to change without notice.

Information provided by our supplier - Norwesco.com